Stator For Yamaha FZ1 1000 2006-2015 5VY-81410-00-00 2D1-81410-01-00

Brand new stator

Direct replacement to your original unit

Plug-and-play, direct fit, easy installation.

Highest grade lamination materials

Highest grade copper windings, resistant to 200 degrees Celsius.

Pick up pulsar coil included

Connector included

Rubber grommet included

Adjustable timing plate to advance and retard up to 10 degrees included

All product shipped are tested

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Description

Instructions:

Before installing your new stator

Check the AC output of the stator.

Replace any burned or corroded connectors on stator and regulator/rectifier

Check and repair any melted wiring.

Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.

All of the wires are installed in the correct order; please do not change any of the wiring configurations.

This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.

If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Wire to wire resistance

Alternator : White to White = 0.4ohms +/-20%

Dimensions

Interior diameter : 18mm

Exterior diameter : 68mm

Thickness : 42mm

Length of wires stator to grommet : 125mm

Length of wires grommet to plug : 500mm

⚠️WARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.